Pokemon Server Archive

PvP Server => Pokemon Maps => Kanto-Related => Topic started by: 1cec0ld on June 08, 2013, 02:21:16 am

Title: Kanto Mainland to-do list
Post by: 1cec0ld on June 08, 2013, 02:21:16 am
Link route2 south to viridian forest south via commandblock (op only)
Route2 route building needs interior (finish it)
Link route2 north to viridian forest north via commandblock (op only)
De-ugly mt moon (finish it)
SS anne interior (start it)
Celadon Dept Store interior (start it)
Silph co interior (finish it)
Silph co warp pad command blocks (start it)
celadon team rocket interior (finish it)
Spirit tower interior (start it)
Hall of fame (start it)
Power Plant interior (start it)
Title: Re: Kanto Mainland to-do list
Post by: Anonymouslyanon on June 08, 2013, 04:44:27 am
The top three are done.
Title: Re: Kanto Mainland to-do list
Post by: 1cec0ld on June 08, 2013, 10:45:20 am
Thank you
Title: Re: Kanto Mainland to-do list
Post by: ryancpexpert on June 08, 2013, 02:44:05 pm
I could help out on some of this if you want 1ce

Title: Re: Kanto Mainland to-do list
Post by: bomberdood on June 08, 2013, 08:07:50 pm
I finally got back to the server. Silph Co. Is done as soon as you link the teleporters. Interior is finished.
Title: Re: Kanto Mainland to-do list
Post by: bomberdood on June 08, 2013, 08:53:30 pm
I am also starting Spirit Tower/ Pokemon Tower
Title: Re: Kanto Mainland to-do list
Post by: Anonymouslyanon on July 17, 2013, 05:10:07 pm
was the power plant interior ever finished/started? i can't find it on the server.
Title: Re: Kanto Mainland to-do list
Post by: 1cec0ld on July 17, 2013, 07:38:39 pm
Not to my knowledge.
Title: Re: Kanto Mainland to-do list
Post by: Pythonhier on August 27, 2013, 10:44:40 pm
Ok so I finished the Team Rocket HQ interior, go check it out.
Quote
Enter the Celadon City Game Corner, then go through the paintings on the right, and press the button to enter the Team Rocket Headquarters.

However there is still a few finishing touch's that need to be deal with.  The command block's for the elevators.  I have placed sign's infront of the elevator doors, and next to the buttons inside the "Elevator Room" to give you an idea of what the command block needs to do.  I never used command blocks, and I don't think I have access for them so I'm requesting someone anyone, who has a spare 5-10 min's to go over and do this for me.

There is one thing though you should know before working on these teleporters.  You can't just walk up to the B4 Elevator, cause in the game, you can only access it through the elevator so here is what you got to do to get down there. (If you don't already have an idea).
Quote
1. Goto the Elevator B1 [x; 2186, y;51, z;170], and set the pressure pads outside the door to teleport into the elevator room [x;2173, y;37, z;151].
2. Use the now set pressure pad(s), to enter the elevator room.
3. Now set the button to the B4 Elevator door [x; 2161, y;16, z;174]
4. Use the button to teleport to the B4 Elevator door, which is the elevator entrance just outside Giovanni's room.

Ok?  So you can do that at any time, cause you still will need to set the teleport locations for the Elevator door B2, and the teleports to the elevator door B2, and B1 while your in the base.

Alright, Thanks for the help to whomever does it for me.

P.S. Don't need to put P.S.  Anyway's if you want to make any changes to the place, cause you find it doesn't fit, I really don't mind. I probably won't be going back in there again unless you guys tell me personally to go fix something.  Lol